ATYS MEDICAL Microflow-S, Пользовательская документация

Страница: 5 / 12

Microflow-S pocket Doppler
User’s Documentation
20 174 C
Page 5/12
3.9 Essential performance
Main performances are:

Doppler sound

Detection of flow/backflow for peripheral arteries using LED’s.
Loss or alteration of performance for these 2 items cannot result in injury.
Then there is no essential performance for this device documentation
4 CAUTION
4.1 Operator
The MICROFLOW S must be used by or on the order of physician.
Cleaning and disinfection procedure must be applied between patients.
The MICROFLOW S shall be used by trained people.
MICROFLOW S is not intended to replace other means of evaluating vital patient physiological
processes.
4.2 Storage environment
Climatic environment : storage: 10-40°C, 10-80% Hr.700-1060 Hpa
For transport and storage, the device must be placed in its original packing. Cautions to be applied
for the transport and the storage are labeled on the box.
If you do not have the original packing materials, please contact your Atys dealer.
Do not use the
MICROFLOW S if the packing of the device or of the probe is damaged.
The MICROFLOW S must be stored and moved in its box.
The complementary protective packing must be used in the case of a dispatch.
4.3 Operating environment
Climatic environment : operating: 15-25°C, 10-80% Hr, 700-1060 Hpa
Do not use the device outside the specified environment.
To prevent fire and electrical hazards, keep the
MICROFLOW S out of rain, water and humidity. If
the system does come in contact with liquid, shut the system down and contact your Atys service
representative.
The MICROFLOW S shall not be used at home environment
The MICROFLOW S must not be used outside the specified environment.
4.4 Electrical safety
Before use, control the sensor and its cable for visible damages. Never use the sensor if cracks or
other damages are visible.
Use only the battery supplied by Atys.
To change the battery, follow instructions delivered into user documentation.
In case of no use of the device for some time, remove the battery to prevent battery leakage.
Do not use after fulid insertion
Use only the probes supplied by Atys