8
TESTING
Note: Unit must be powered for three minutes before test can be performed.
The Test/Rest button is used to verify proper alarm operating. Executing the test
function sounds the alarm and lights up all LED's. The test will sound the alarm
twice, with 4 “beeps” in 1 second followed by 5 seconds of silence.
By pressing the button, you can verify that the alarm sounds and that all visual
indicators function properly. The alarm is internally monitored while powered to
ensure proper operation and to detect faults.
Important
•
This detector will only indicate the presence of CO or LP gas at the sensor.
Gases may be present in other areas.
•
The detector is not suitable as a smoke or fire detector. Not suitable for
installation in hazardous locations as defined in the National Electrical Code.
WARNING
Test Detector operating after vehicle has been in storage, before each trip, and at
least once per week during use.
