ATV IPSDMV22D1 Скачать руководство пользователя

Страница: 72 / 83

- the boot protocol (DHCP or static)

- the static IP address

- the default router

- the subnet mask

- the system time

- Default:

The default button should be used with caution. Pressing this will return all of

the network camera's settings to the factory default values (including the IP address).

• Update Server:

Carry out the upgrade by importing an upgrade file and pressing the

Upgrade button. During the upgrade, do not turn off the power of the network camera. And
try an access again after waiting five minutes or longer.

• Backup:

Save a setting value that users enter to the network camera, to a user PC.

• Restore:

Import and apply a setting value saved to a user PC.

Note:

Backup and Restore can only be used on the same unit running the same firmware.

This feature is not intended for multi-configurations or for firmware upgrades.

7) Support

The support page provides valuable information on troubleshooting and contact information,
should you require technical assistance.

• Logs:

The network camera support system log information. Click the System Log button to

get the log data.

• Update Server:

- Server Report:

Click the Server Report button to get the important information about the

server’s status and should always be included when requesting support.

- Parameter List

– Click the Parameter List button to see the unit’s parameters and their

current settings.

Содержание IPSDMV22D1




















































































Результаты поиска

Содержание IPSDMV22D1

Отзывы:

Похожие инструкции для IPSDMV22D1

Бренды по названию

Популярные бренды

ATV IPSDMV22D1, Руководство пользователя

Результаты поиска

Содержание IPSDMV22D1

Отзывы:

Похожие инструкции для IPSDMV22D1

Бренды по названию

Популярные бренды