manualshive.com logo in svg

Attwood X3-40, Руководство по эксплуатации, обслуживанию и установке, Страница: 30 / 39

Поделиться
Скачать
Attwood X3-40 Скачать руководство пользователя страница 30

Speed Control—Hand‑Operated Models

Adjust the speed control to the desired direction and thrust level. Rotate the

twist‑tiller handle clockwise for forward movement or counterclockwise for

reverse movement. The "off" handle position stops the motor.

Five

‑

speed models

 have five forward speed settings and two reverse speed

settings.

Digital variable speed models

 allow you to select any speed from 0–10 in

forward or reverse.

a -

Forward speed control

b -

Off

c -

Reverse speed control

Battery Indicator Light (Digital Models Only)

The battery indicator light (located on the head cover) provides battery

state‑of‑charge information at a glance. The battery light will turn on when the

trolling motor is connected to the battery, and will remain on the entire time that

the motor is connected to the battery. Depending on the battery

state‑of‑charge, the light will either be green (charged) or red (discharged).

b

45750

c

a

TROLLING MOTOR INSTALLATION AND OPERATION

  

24

eng

Содержание X3-40








































Отзывы:

Нет отзывов