Attonics Systems ATTO3, Руководство пользователя

Страница: 4 / 26

ATTO 3 Manual 1.6 4
What’s Inside the Box
1
Attonics Spectrometer
2
USB3.0 interface cable
3
Flash drive
Before you start
Hardware Requirements
CPU Intel Core 2 Duo or higher
RAM 4 GB or higher
Hard Drive
Space
1 GB for the software
USB Port
USB 3.0 port(preferred)
USB 2.0 port compatible
Software Requirements
Operating System Windows 10
Caution
Mechanical Shock
This product is sensitive to mechanical
shock, improper handling can cause
permanent damage to the product. Do
not handle or expose to shock while
product is in operation. Handle with great
care.
Heat Build-up
It is recommended to disconnect the
device when not in use. The electronic
components inside may cause a heat
build-up inadvertently leading to partial
damage or failure.
Install Software before Connecting
Be sure to install the software BEFORE
connecting the spectrometer to your PC.
The software installs the drivers required
for spectrometer installation. If you do
not install the software first, the computer
will
not properly recognize the
spectrometer.
Safety from dirt and liquid
To ensure the optimal performance of
the device, please ensure that no solids
or liquids enter. the spectrometer
through the input port.
Active Illumination based Devices
Beware of the illumination light sources
at the entrance of the spectrometer. The
light sources are very bright for normal
viewing and should not be directly
viewed at any point of time. Bright light
exposure
can cause temporary
blindness.