ATTO Technology FastStream NDMP 4600, Инструкция по установке и эксплуатации

Страница: 56 / 58

vii
ATTO Technology Inc. FastStream Installation and Operation Manual
Appendix E Safety standards and compliances
The equipment described in this manual generates and uses radio frequency energy. If this
equipment is not used in strict accordance with the manufacturer's instruction, it can and
may cause interference with radio and television reception. Refer to the Technical Specification sheet
available at
www.attotech.com
for a full list of certifications.
WARNING
Risk of explosion if battery is removed and/or replaced by an incorrect type. Dispose of used
batteries in accordance with your local environmental regulations.
No operator serviceable components inside the FastStream NDMP 4600.
Do not remove cover of FastStream NDMP 4600. Refer servicing to qualified personnel.
FCC Standards: Radio and Television Interference
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC rules, which are
designed to provide a reasonable protection against such interference when operating in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference, in which
case the user, at his own expense, will be required to take whatever measures may be required to correct
the interference.
If this equipment does cause interference to radio
and television reception, which can be determined
by turning the equipment off and on, try to correct
the interference by one or more of the following
measures
• Move the receiving antenna.
• Relocate the FastStream NDMP 4600 with
respect to the receiver, or move the FastStream
NDMP 4600 away from the receiver.
• Plug the computer into a different outlet so the
computer and receiver are on different branch
circuits.
• If necessary, consult an ATTO authorized
dealer, ATTO Technical Support Staff, or an
experienced radio/television technician for
additional suggestions.
The booklet How to Identify and Resolve Radio/TV
Interference Problems prepared by the Federal
Communications Commission is a helpful guide. It
is available from the US Government printing
office, Washington, DC 20402, Stock No. 004-000-
00345-4.
Canadian Standards
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.