ATTO Technology ExpressSAS H1208 GT HBA, Инструкция по установке и эксплуатации

Страница: 12 / 29

FreeBSD (ExpressSAS 12Gb adapters only)
1. Power on your system.
2. Login as root using the su command. You will be
prompted to enter root’s password.
3. Verify the kernel header files are installed.
4. Locate the downloaded driver tarball and copy it to a
directory such as /usr/src. Make sure that none of the
directories in the path have any spaces in their names.
5. Change to the directory where you stored the driver
cd /usr/src
6. Extract the files from the driver tarball by executing the
following command, where XXX is the driver’s versi on
number:
tar xvf fbsd_drv_esashba4_XXX.txz
7. The driver files are extracted to a directory called
fbsd_drv_esashba4_XXX where XXX is the driver’s
version number.
8. Change to the directory created by the tar command as
follows, where XXX is the driver’s versi on number:
cd fbsd_drv_esashba4_XXX
9. Compile and install the driver by executing the install
script as follows:
./install.sh
10. You will be prompted a number of times to provide the
installer with your installation options. Answer each of
the questions until the installation is complete.
11. Continue on to Install Hardware
illumos (ExpressSAS 12Gb adapters only)
1. Power on your system
2. Login as root using the su command. You will be
prompted to enter root’s password.
3. Locate the downloaded driver package and copy it to a
directory such as /root
4. Open a terminal session and change to the directory
where you stored the package
5. Extract the driver package using the sample command
tar -xvf ilm_drv_esashba4_XXX.tgz
6. Navigate to the directory containing the extracted driver
package
7. Install the driver using pkgadd -d
ilm_drv_esashba4_XXX.pkg
8. Reboot. The driver is now installed and ready to use.
9. Continue on to Install Hardware