during the recording. This means that the recorder is in Recording mode.
Press “Mode” button to shift the recording modes from initial
“continuous recording mode” to “voice activated recording mode”.
While the recorder is in the Recording mode, press once the Mode button.
The recorder will blink the blue led depending in which mode is already
set (rapidly in voice activated mode and slower in continuous recording
mode). While blue led blinks, press again the Mode button according to
the mode desire to set the device to record. If the light turns off before
pressing the Mode button, press again the Mode button and press again
during those 5 seconds while the blue light blinks. After pressing the
Mode button you can easily check the status of the Recording mode based
on how quick the blue light blinks.
So with
RecLighter
voice recorder you can choose between 2 recording
modes:
1. Continuous recording mode which is the recorder default working
mode, with a recording quality of 192Kbps.
RecLighter
will record up to
27 hours (if the battery is full) all sounds/voices on a 15 ft radius
continuously.
2. Voice activated recording mode with a quality recording of 512 Kbps
for a more accurate voice activation system. In this mode it will record
ONLY if sound/voice is detected in the recorder action radius. The
periods of time with complete silence won't be recorded to avoid long
hours of silent recording so, you can listen the footage much easier,
especially those long hours recordings.
IMPORTANT:
Once you set the device on Voice Activated Mode, when
the volume of the sound source drops below 40dB, the device will
PAUSES recording automatically. It will record again once a sound over
40dB is detected. The 40 dB is equivalent for a normal voice
conversation in a radius of 10 feet.
Useful tips for understanding the device:
1. The blue light when you activate the CONTINUOUS recording mode
blinks slower than when you activate the VOICE ACTIVATED
recording mode.
2. When the built-in memory is full, the blue light will blink very fast and
shutdown automatically. Please connect the device to PC to delete or
transfer unnecessary files to free some memory of the device, or if you
