4
aTTo Digital | website:
www.atto-digital.com
; email: [email protected]
3. Which is the battery life of
dotON
voice recorder and HOW voice activation
system works?
This mini voice recorder, even if is so small, has an impressive life time battery of 20 hours. The
battery life is not influenced by the voice activation system. That means: once you start the voice
recorder, the battery will last for 20 hours (please assure that the device has battery fully charged),
even if near the device someone is talking or not. So the voice activation system will not turn ON and
OFF the device until it records 20 hours of voice conversations. But the recorder will make records
during those 20 hours only when a voice or a sound is detected near the device.
4. The voice activation system means that the device records only when it detects a
human voice?
No, the voice activation system is sensitive for any sound over 45dB, not necessary a human voice.
Troubleshooting:
1. I connect the device to the computer and the new partition with folder
RECORD doesn’t bring up!
Resolve:
1. Please make sure that the device button is in OFF position before connecting it to the computer.
2. Make sure that there is no software installed in your system which may block the installation of a
new device (such as firewall, complete antivirus suite, etc.)
3. Try another micro USB cable and/or another USB port of your computer.
2. The device doesn’t capture parts of conversations!
Resolve: Since the device has an automatic voice activation system which start recording when the
sound reach the level of 45dB (which is the level for a normal voice conversation from about 6-8 feet),
please make sure that the device is close enough to the subject that you need to record. Please run
some distance tests before using in a real situation for a better understanding about how the device
works.
Note: Some slight voice will not be recorded (sounds below 45db). We are not responsible for
the unrecorded information or incomplete information. Stop/start the recording at a sound
higher than 45dB is the normal working mode for this device. Not capture sounds below this
level is not a defect; just be sure to put the device close enough to the subject to be record.
