1. Used to lock the system and protect set parameters
of the system from being changed by unauthorized person.
2. Coordinate with the fixed temperature of parameter
setup of the handle channel, lock the temperature of
the whole equipment and control the welding process.
The factory default is: OFF.
Under the password setup state, enter a three-digit password, display
the prompt locked by the system and shut down the prompt window
3s later. Press Enter to resume password setup.
Used to open or close the prompt tone for key operation:
Open (ON): prompt tone is given for key operation.
Close (OFF): prompt tone is not given for key operation.
The factory default is: ON.
Used to set the contrast ratio of the display screen:
10: minimum contrast ratio.
100: maximum contrast ratio.
The factory default is: 44.
Enter the correct password, the system is
unlocked and the password is cancelled;
Enter the incorrect password, wrong password
will be reminded.
12
Password
System Set
〉
Password
System Set
Languages
En
Unit
C
Password
* * *
Keypad Tone
ON
LCD Contrast
44
System Lock-in
System Set
〉
SystemLock-in
Set PIN code
Locked
0
-
-
PIN Code
：
000
System unlock
System Set
〉
System unlock
Message
PIN code Error
Set PIN code
0
-
-
Keypad Tone
System Set
〉
Keypad Tone
System Set
Languages
En
Unit
C
Password
* * *
Keypad Tone
ON
LCD Contrast
44
LCD Contrast
System Set
〉
LCD Contrast
System Set
Languages
En
Unit
C
Password
* * *
Keypad Tone
ON
LCD Contrast
44
