ATTACK OT81, Руководство пользователя

Страница: 18 / 24

18
f
The identification code of your device
is now visible on the display. The check
mark indicates that the data exchange with
the device has been established.
f If the device is “not available”, search for
availability through the Refresh command�
WIFI modem configuration is complete.
WIFI modem total reset
The Total reset (reset to factory settings) is to be
performed only in exceptional cases, for example:
f
when trying to restore operation after device’s
malfunctions that could not be diagnosed
f in case of loss of the credentials necessary to
access the device
f Hold R key pressed for at least 10 seconds,
until the green LED 3 starts flashing.
Note: the R key is inside the box and is activated
by pressing the upper cover at the centre of
the area shown in the figure:
NTC
OTM OTS/TA
+24 Vdc
NON USATI
1 2 3 4 5 6
7
R
PORTE DI COMUNICAZIONE STA
TO
APPLICAZIONE
COMANDO D
A WFC
STA
TO WI-FI
1 2 3 4 5 6
7
PORTE DI COMUNICAZIONE STA
TO
APPLICAZIONE
COMANDO DA
WFC
STA
TO WI-FI
R
R
MAC address AB:01:CD:65:97:BD
1 2 3 4 5 6
7
COMMUNICATION GATEWAY APPLICATION STATUS
WFC CONTROL
WI-FI STATUS
R
MAC address AB:01:CD:65:97:BD
f Release the R key; LEDs 4-5-6 start flashing
noticeably “randomly”.
Note: after
a
Total reset
, it is necessary
to configure the WIFI modem again
(see "WIFI modem configuration" on
page 15)
NTC
OTM OTS/TA
+24 Vdc
NON USATI
1 2 3 4 5 6
7
R
PORTE DI COMUNICAZIONE STA
TO
APPLICAZIONE
COMANDO D
A WFC
STA
TO WI-FI
1 2 3 4 5 6
7
PORTE DI COMUNICAZIONE STA
TO
APPLICAZIONE
COMANDO DA
WFC
STA
TO WI-FI
R
R
MAC address AB:01:CD:65:97:BD
1 2 3 4 5 6
7
COMMUNICATION GATEWAY APPLICATION STATUS
WFC CONTROL
WI-FI STATUS
R
MAC address AB:01:CD:65:97:BD
WIFI modem
Controls and indicators of the
WIFI modem
R Reset button
1
YELLOW - OTM (boiler) connection status
OFF: lack of communication with the boiler or
open contact
ON: regular communication with the boiler
FLASHING (quickly ½ sec.): Communication error
with the boiler or the remote control
FLASHING (slowly 2 sec.): Request to the boiler
in progress (generated from APP+WIFI modem
or from Opentherm termostat)
2
YELLOW - OTS (remote control) connection
status
OFF: no connection (open contact)
ON: regular communication with remote control
FLASHING (quickly ½ sec.): Communication error
with the boiler or the remote control
FLASHING (slowly 2 sec.): OTS contact closed
(not provided for in this application)
3 GREEN - WIFI modem status
OFF: normal operation
FLASHING (quickly ½ sec.): Total reset in start-up
phase
(continues…)