ATSUMI ELECTRIC CO., LTD.
4-2-2 SHIN-MIYAKODA, HAMAMATSU, SHIZUOKA 431-2103 JAPAN PHONE:053-474-1173 FAX:053-474-1177
1
For Safety Installation
1. Read the following carefully prior to installation.
Attention !
■
Do not install outdoors.
■
Avoid intense shock or vibration.
■
Avoid intense electrical or electromagnetic noise.
■
Avoid magnetic materials.
■
Avoid corrosive gas and dust.
■
Avoid direct sunlight and intense headlight.
■
Do not install in the areas where sudden temperature fluctuation is expected.
■
Do not install in the area where dewing is expected such as refrigerator.
■
Install within 2.5 - 6 meter height from floor.
■
Install and set up so that burglars will cross field of view.
■
Avoid partitions, furniture and blocking objects within coverage.
■
Detecting performance is based upon temperature difference between moving object such as human being and stable
■
background. When the difference is greater, actual coverage may be wider.
2. Read the following prior to installation and regular maintenance.
Warning !
■
Do not perform installation when it thunders.
■
Do not disassemble or modify the unit.
■
Electricity must be cut off during installation.
■
Keep power between 9 - 18 VDC anytime.
Attention !
■
Avoid intense shock and vibration.
■
After installation and setup, make sure of performance and appropriate coverage of the unit by walk test.
■
Mirror, partition or wall that may reflect well will cause inappropriate coverage.
■
Remove partitions, furniture and objects that may block coverage.
■
Use blinds or curtain to avoid direct sunlight or intense headlight.
■
Avoid fax machine, heater or air conditioner that may cause heat fluctuation.
3. Other attention
■
Moving object cannot be detected in gap of detecting zones.
■
Static object including human body cannot be detected.
■
Static human body could be detected in case its temperature fluctuates.
■
Moving object could not be detected when its temperature is close to that of stable background.
2
COMPONENTS
Make sure that the following items are included in the package prior to installation.
Description
Detector (Base & Sensor)
Mounting Screw (Ø4)
Quantity
1 each
2 each
Description
Operation Manual
Quantity
1 each
*Screws are put on packing material.
PASSIVE INFRARED DETECTOR
IR36E
INSTALLATION INSTRUCTIONS
We appreciate your purchase of ATSUMI PASSIVE INFRARED DETECTOR.
Please read the following installation instructions carefully for appropriate use of the product.
1
