6
7
Connect to App to record ECG signal
After attaching the device, connect the device with the smartphone
App (AT-Note) to check the ECG signal.
Must check the start of
recording ECG signal.
2. Connecting with the smartphone App (AT-Note)
1. Bluetooth & Location service
Check if the Bluetooth and location service functions are activated
to connect the device.
Bluetooth
&
Location
Turning off the power
Put the Sub Patch on top of the attached device in the correct direction.
After attaching the Sub Patch, press firmly on the entire surface of the
device for at least
1 minute
to improve adhesion. Attach Sub Patch
correctly at once. Reattachment can not be possible.
Attaching the Sub Patch
7
After attaching the Sub Patch, detach the protective tape from the base
film slowly.
Removing protective tape
8
Checking the attachment of the device
Check if the device and the Sub Patch are attached well without loose
areas. If there are unattached areas on the skin, press the base film
with finger smoothly to be attached well.
9
- It is impossible to physically turn it off. After the operation time,
the button color turns red and the power turns off automatically
after 3 beeps.
* ATP-C130 : 14 days
Once the initial connection is checked, device is not
terminated for the duration of use.
- The working status of the device can only be checked through the
App’s real-time live Viewer.
Additional Information
How to use the device
02
How to use the device
02
