ATA J2200-VoIP GATWAY User’s Manual
Save Change & Reboot
In Save Change you can save the changes you have done. If you want to use new setting
in the ATS-J2200X, you have to click the Save button. After you click the Save button, the
ATS-J2200X will automatically restart and the new setting will effect.
Update
You can update the ATS-J2200X’s firmware to the new one or do factory reset to let the
ATS-J2200X back to default setting.
In New Firmware function you can update new firmware via HTTP in this page. You can
upgrade the firmware by the following steps:
Select the firmware code type,
Risc
code.
Click the “Browse” button in the right side of the File Location or you can type the
correct path and the filename in File Location blank.
Select the correct file you want to download to the ATS-J2200X then click the Update
button.
In Default Setting you can restore the ATS-J2200X to factory default in this page. You can just
click the Restore button, and then the ATS-J2200X will restore to default and automatically
restart again.