Operations and Reference Manual
Axsis™ SC-300H Digital Radar Speed Camera
2011 American Traffic Solutions, Inc.
Page 15
Proprietary and Confidential
All Materials are subject to change without notice.
6/30/2011
3.
O
PERATING THE
S
ELF
C
HARGING
B
ATTERY
B
OX
3.1
E
XPLANATION
This is the introduction to the self charging battery box. The benefit to this battery box is that as
long as the vehicle is running, the strobe battery should not deplete beyond use. It also keeps
the strobe battery compl etely separate from the radar battery. This is very importa nt because
the strobe battery can inject ‘noise’ into the radar and can cause problems.
3.2
P
URPOSE OF THE
S
WITCH
S
ETTINGS
The battery box breaks down into two sections.
3.2.1 Charging
Side
These are the two switches on the left side of th e battery box. Whichever settings the switches
are turned to is which batteries will be charging.
1) When the two switches are on set to ‘1’ you will be charging the LEFT battery.
2) When those switches are set to ‘2’ you will be charging the RIGHT battery.
3) When those switches are set to ‘1+2’ you will be charging both batteries.
4) When those switches are set to ‘OFF’ neither of the batteries will be charging.
3.2.2 Static Auxiliary Side
These are the two switches on th
e right side of the battery box. T hese determine which
batteries will be used to power the radar and the camera.
1) When the two switches are on set to ‘1’ you will be using the LEFT battery.
2) When those switches are set to ‘2’ you will be using the RIGHT battery.
3) When those switches are set to ‘1+2’ you will be using both batteries.
4) When those switches are set to ‘OFF’ neither of the batteries will be used.