Atronic JCM UBA-10-SS страница 13 Скачать руководство пользователя

Страница: 13 / 14

March 2006

Bill Acceptor - JCM UBA-10-SS

Bill Acceptor Tests

Description

The host machine provides test routines for bill

acceptor diagnostics.

Bills enabled

Use this menu to check which bills are enabled /

disabled by the host machine.

1. Open maindoor and press service button to enter

the Service Menu.

2. Enter "Service Menu / Diagnostics / Bill Acceptor /

Bills Enabled". A list with bill values, currency, code

and state is displayed.

Validator Test With Stacking

Use this menu to test bill acceptance with stacking.

Make sure to have hopper drawer keys and cashbox

keys at hand to retrieve bills after testing.

1. Open maindoor and press service button to enter

the Service Menu.

2. Enter "Service Menu / Diagnostics / Bill Acceptor /

Validator Test With Stacking".

3. Insert bills and check acceptance and stacking.

Validator Test Without Stacking

Use this menu to test bill acceptance without

stacking. After validation the bill is rejected.

1. Open maindoor and press service button to enter

the Service Menu.

2. Enter "Service Menu / Diagnostics / Bill Acceptor /

Validator Test Without Stacking".

3. Insert bills and check acceptance.

ROUBLESHOOTING

Note

Depending on game software

version the layout of the

menus may vary.

Содержание JCM UBA-10-SS














Результаты поиска

Содержание JCM UBA-10-SS

Отзывы:

Похожие инструкции для JCM UBA-10-SS

Бренды по названию

Популярные бренды

Atronic JCM UBA-10-SS, Руководство пользователя

Результаты поиска

Содержание JCM UBA-10-SS

Отзывы:

Похожие инструкции для JCM UBA-10-SS

Бренды по названию

Популярные бренды