Atronic Cashline, Руководство по установке

Страница: 20 / 23

20
February 2008
Cashline™ Wide Body Cabinet (WBC) - Installation Manual
MACHINE INSTALLATION
Check Commboard Settings (optional)
The commboard DIP switches and rotary switches
configure SAS address, APL address, progressive
mode and SAS (dual) channel allocation.
Use the DIP switch tables within the Software Ma-
nual for a particular software version (e.g. P-Level) to
check or alter the commboard settings. Then connect
to the online system components.
Apply power
• Verify voltage specifications stated on type plate,
before connecting to a main power socket.
• Connect main cable to a grounded main power
socket, that is capable to deliver the specified cur-
rent rating.
Switch on the machine
• Press the power switch to switch on the machine.
The LED's on the Master Board (they inicate cor-
rect voltages) should all be lit.
• To operate the machine while the main door is open,
pull the main door switch to set it to closed positi-
on.
Execute basic machine setup (if needed)
If any changes to the factory pre-set basic machine
setup are needed, further procedures are necessary.
• Init Setup (requires RAM-Reset)
• Selectable Paytable Configuration
(requires Config Key EPROM)
• PC-Setup (requires external configuration software)
-> See manual "Software" for details
2 3 0 50 2 V Hz A
M
ACHINE
I
NSTALLATION