Atrix VACBP36V, Руководство пользователя, Страница: 14 / 16

OPERATION
Charge in a well ventilated area. DO NOT block charger
vents. Keep them clear to allow proper ventilation.
CHARGING LITHIUM POLYMER BATTERY PACKS
It is not necessary to drain the battery pack completely before recharging.
If the charger’s light is not lit at any point during the charging process, remove the battery
pack from the charger to avoid damaging the product. DO NOT insert another battery.
Contact Atrix with any issues.
BATTERY PROTECTION FEATURE
The 36-volt Lithium Polymer batteries are designed with features that protect the Lithium
Polymer cells and maximize battery life. When the battery has reached its minimum
voltage level the electronics will shut off the battery. Once the battery shuts off, it must be
recharged.
PREPARING BATTERY PACK FOR CHARGING
1. Plug the charger’s power cord into the charger (Fig. 21).
2. Turn off the power switch.
3. Unlock the battery pack by turning knob counter clockwise and take the battery pack out
from the vacuum (Fig. 22).
4. Plug the round connector on the charger’s cord into the battery pack (Fig. 23).
5. Plug the charger’s power cord into wall outlet (Fig. 24).
6. The indicator light will turn red when charging and turn Green when full charged. The
Battery pack may require approximately 3 hours to full charge.
Note: Battery pack and charger may get warm while charging.