![Atrix OMEGA SUPREME PLUS CLEANROOM VACOMEGASE Series Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/atrix/omega-supreme-plus-cleanroom-vacomegase-series/omega-supreme-plus-cleanroom-vacomegase-series_instruction-manual_3005114004.webp)
10.
These vacuums have a factory installed resettable Thermal Cutout (TCO) for
added operator and motor safety. If the unit gets too hot, the vacuum will
shut down for approx. 20 minutes. Turn the on/off switch to the off position,
and turn back on in approximately 20 minutes. Your hose may be clogged, or
it may be time to install a new filter.
MAIN (Primary) FILTER CHANGE-OUT
INSTRUCTIONS
1.
Release the two front latches and open the lid.
2.
Insert orange plug halfway in contaminated filter cartridge.
3.
Lift the filter cartridge out by placing fingertips under lifting tabs located on
the ends of the cartridge and lift up.
4.
Push orange plug all the way in.
5.
Dispose of the filter cartridge in an appropriate manner compliant with all
local, state, and federal laws.
6.
Insert new filter cartridge.
7.
Close lid and latch securely.
Exhaust (Secondary) FILTER CHANGE-
OUT INSTRUCTIONS (Biannually)
TURN OFF AND UNPLUG POWER CORD FROM VACUUM AND FROM POWER SOURCE
1.
Remove screws (6) holding bracket to exhaust vacuum end.
2.
Remove EF2 filter cartridge.
3.
Replace with new EF2 filter cartridge.
4.
Reattach bracket.