manualshive.com logo in svg

Atrix Ergo Pro, Руководство пользователя, Страница: 12 / 13

Поделиться
Скачать
Atrix Ergo Pro Скачать руководство пользователя страница 12

12 

 

 

 

 

 

OPERATION  

 

When using the charger, basic precautions should always be followed, 

including the following:  

Battery MUST be REMOVED from the Vacuum 
prior to charging. Failure to follow the warnings and 
instructions  may result in shock, fire, property 
damage and or serious injury or death. 

CHARGING LITHIUM POLYMER BATTERY PACKS  

It is not necessary to drain the battery pack completely before 

recharging. If the charger’s light is not lit at any point during the 

charging process, remove the battery pack from the charger to avoid 

damaging the product. DO NOT insert another battery. Contact Atrix 

with any issues.  

 

BATTERY PROTECTION FEATURE  

The 26-volt Lithium Polymer batteries are designed with features that 

protect the Lithium Polymer cells and maximize battery life. When the 

battery has reached its minimum voltage level the electronics will shut 

off the battery. Once the battery shuts off, it must be recharged.  

 

PREPARING BATTERY PACK FOR CHARGING  

BATTERY MUST BE REMOVED FROM VACUUM PRIOR TO CHARGING 

AND DURING CHARGING PROCESS.  

1.

 

Turn off the power switch. 

2.

 

Unlock the battery pack by turning knob counterclockwise and 

remove battery pack from the vacuum.  

3.

 

Plug the charger’s power cord into the charger. 

4.

 

Plug the round connector on the charger’s cord into the battery 

pack. 

5.

 

Plug the charger’s power cord into wall outlet.  

6.

 

The indicator light will turn red when charging and turn Green 

when full charged. The battery pack may require approximately 

3.5 hours to fully charge.  

Note: Battery pack and charger may get warm while charging. 

Содержание Ergo Pro














Отзывы:

Нет отзывов