3-3
CTS option, Interface type.
E1 Setup :
Configures the E1 line parameters, such as: framing,
cable length and terminal type.
Aux :
Setup the auxiliary parameters, including: clock
source, keylock enable and keylock password.
Ts Mapping :
This option maps the appropriate time slots to the
respective DTE port.
Sys Rst :
Rests the whole WireSpan 3000/3000E.
Diagnostic
The diagnostic allows user to do variety of loop back to assist user
in isolating network problem.
Note : you must choose
”
E1 Terminal
”
mode when you use DTE
Port and don't use E1 port in HTU-R side
Profile
The WireSpan 3000/3000E supports 5 user profiles to save for future
use. Also provide 10 factory default profiles to load.
Menu Tree Operation
STATUS MENU
[MAIN] C
STATUS
This Menu shows the loop STATUS of HDSL;E1 STATUS and
other status display.
CONFIGURE MENU
[MAIN] C
CONFIGURE
You can configure the WireSpan 3000/3000E through this menu,
to get the best performance.
Содержание WireSpan 3000
Страница 1: ...Atrie WireSpan 3000 3000E MODEM User s Manual ...
Страница 2: ...WireSpan 3000 3000E USER S MANUAL ...