Atrie BUB-204B, Руководство по эксплуатации

Страница: 16 / 20

4.3.1 BlueChat2 User Interface
BlueChat2 opens with a user interface window, as Figure 4.4 indicates. The function of each button or
area is described as follows:
Role
: Selects the role for the device as either the master or the slave.
Xfer Type
: Selects which type of data is sent.
Chat Link
: Used to send and receive text data.
Host Controller Interface Messages
: HCI commands and responses are displayed here.
Disconnect
: Closes the link between the two devices.
Connect
: Establishes a connection to the selected device by setting up an ACL link. If Xfer Type is set to
Audio
, a SCO link is also created.
Inquiry / Cancel Inquiry
: If the device is the master, this button controls inquiry for other Bluetooth device
in the area. If the local device is selected to be the slave, this button will be greyed out.
Bluetooth Device Address
: This lists the address of the local device and, in the pull-down selection box,
the addresses of any devices found during an inquiry. Use the selection box to highlight the Bluetooth
device to which you wish to connect.
Figure 4.4 : SPI BCCMD interface