6
OPERATING INSTRUCTION
On the top-right of the electric firebox is the touchscreen control panel. This panel contains the
buttons to properly operate the electric fireplace. the buttons on the remote control function in the
same way. The remote control has an effective range of up to 6 m.
Digital Display
NOTE: The remote control is intended only for the functional operation of
the product, It can not lock/unlock the heating function
!
POWER
The POWER button turns the appliance on or off. It has a memory function; the button turns off all
functions at once but retains the settings in the memory. By pressing the button again, the unit will
turn on at the same settings. If the TIMER has set and the time has expired all functions will stop.
Press the POWER button start the appliance.
FLAME
Each time the Flame Button is pressed, the color of the flame changes. There are 7 colors (L8-L2),
dynamic condition(L1) ,and the OFF setting you can cycle through.
HEATER
The Heater Button turns the heater On & Off. When the heater is on, press the Increase/Decrease
button to change the desired temperature. There are 11 temperature settings: 82
℉
-ON-64
℉
-66
℉
-68
℉
——80
℉
(27
℃
-ON-18
℃
-19
℃
-20
℃
——26
℃
).
Temperature unit convert function: When the heater is on, press and hold the Power Button for
5seconds, current temperature unit display will flash 3 timers and convert to another temperature
unit (Note: This can't be set with the remote control).
Lock & unlock heater function: press and hold the Heater Button for 10 seconds, the ember bed will
flash 6 times, indicating that the heater function is locked. To unlock the heater function, just repress
and hold the heater icon for 10 seconds again, then the ember bed will also flash 6 times indicating
the heater function is unlocked and to recover the original states which you have set.(Note: This
can't be set with the remote control).
TIMER
The TIMER has adjustable setting at range from 30 minutes to 6 hours and OFF. As shown the
following: 30 minutes-1h-2h-3h-4h-5h-6h-OFF. Once you have set the timer, and the timer is
up,
it
will close all the functions and enter standby mode. In this mode, you should touch the power icon
to restart the appliance.
Содержание FA23V60L-C7
Страница 15: ...15 CONSIGNES DE FONCTIONNEMENT Affichage numérique ...
Страница 24: ...24 Pantalla digital INSTRUCCIONES DE USO ...