Freevent O
2
Adaptor Mini should be replaced
at least every 24 hours, or when it becomes
dirty, contaminated or shows any signs of
damage. If needed, it can be removed and
used again within 24 hours for the same
patient.
2
M
C
2
6
11-
Tc
E
N
20
20
10
© Atos Medical AB, 2020
Connect the Freevent O
2
Adaptor Mini to
Freevent XtraCare Mini (HME). An audible
click will confirm it’s securely in place.
1
Attach the oxygen tubing to the adaptor and
make sure the oxygen tube goes beyond the
conical edge of the connector.
2
Attach the HME to the tube as described in
section How to use Freevent XtraCare Mini.
3
Apply oxygen as prescribed by the physician.
4
To detach the Freevent O
2
Adaptor Mini from
the HME, unclip the adaptor and remove.
3
Remove the HME as described in section How
to use Freevent XtraCare Mini.
1
XtraCare
™
How to use Freevent O
2
Adaptor Mini
If supplemental oxygen is needed, Freevent XtraCare
Mini can be combined with Freevent O
2
Adaptor
Mini. Oxygen tubing of 1/8 inch (3.2 mm) diameter is
connected to the oxygen port of the adaptor.
Attach:
Remove:
5
Dispose of the used HME and Freevent O
2
Adaptor Mini.
4
The oxygen tubing can be detached from the
adaptor after oxygen supply and attached if
oxygen supply is resumed.
Head office:
Atos Medical AB,
Hyllie Boulevard 17,
SE-215 32 Malmo, Sweden
Tel: +46 (0) 415 198 00,
Email: [email protected]
Manufacturer:
Atos Medical AB,
Kraftgatan 8,
SE-242 35 Horby, Sweden
CLICK
