Atos BullSequana Edge nano, Руководство пользователя

Страница: 17 / 29

Chapter 3. Initial installation and configuration 9
Chapter 3. Initial installation and configuration
The BullSequana Edge nano server is pre-installed with Ubuntu 18.04.
There are two operating modes for the server:
• Connecting a display, using the Ubuntu GUI and treating the server as a
desktop computer.
• Using a LAN connection and SSH, once the IP address is known. The
default behavior is that of a DHCP client.
The following steps apply to the first mode using the Ubuntu GUI, but the
commands will be exactly the same for the second mode that uses an SSH
connection.
3.1 Connecting the server
Procedure
1. Connect the keyboard, mouse and display (HDMI connector) to the
server.
2. Connect the power supply (19-24V DC) to the server.
The power supply can either be server AC converter (which can be
provided by Atos), or a DIN rail DC power supply (not provided by Atos).
3. Connect the network cable to the server.
The network cable will be needed to access the server from a host
system, for additional software installation.
4. The server boots.
This takes about 45 seconds.