Atop Smart Security Server
IS150
User Manual V1.0
35
The basic settings are explained in detail below:
Radio Off:
When enabled, wireless radio would turn off completely.
SSID:
specifies the device’s wireless network name that other wireless devices should use in
order to associate with this AP. There is a
“Scan Network”
button to the right of the empty box.
You can use the
“Scan network”
function to learn about the different SSIDs and channel
numbers in the device’s surroundings, please be patient as this process might take as long as
10 seconds as shown in Figure 4.23. Once it has finished scanning, names and basic properties
of neighboring networks will be shown as in Figure 4.24. When no neighbors have been found
the answer is as follows Figure 4.25. Keep in mind that the SSID should be unique unless
wireless roaming is required.
Figure 4.23
