Atop MB5400, Руководство пользователя

Страница: 47 / 88

Atop Modbus Gateway
MB5400 Series
User’s Manual V 1.3
47
3.10.3 Data Log
The log of Modbus’s exchanged messages is shown in this
Data Log section and listed in Fig.
3.27. You can select a radio button to show All properties or Slave ID Only or Function Code
Only . Event filtering is also available in this section for your customized data analysis by
entering your filter keyword in the Filter Info field and then click Apply button. Traffic analysis
in the system can be done here as well. You can click on the Start button to enable continuously
collecting of data log or click Stop button to end the data log collection. Finally, you can clear
all data log by clicking on Clear button. Additionally, you will be able to browse through the list
of message by clicking on the Last Page or the Next Page buttons at the bottom of the log
table.
Fig. 3.27 Data Log Page