Industrial Managed
Ethernet Switch – EH9711
User Manual
Page
27
of
223
Figure 2.15 Webpage to Configure System SMTP Setting
An example of SMTP Setting is shown in Figure 2.16. When users select the box behind the
Authentication
field,
TLS
field
as well as
User Name
and
Change Password
fields are enabled. Users can configure e-mail address of sender, so that the
recipient can reply back to the correct person in charge. Also, users can configure the subject of email, so that it can be easily
distinguishable from the other e-mails. At last, users can edit e-mail addresses of all four recipients in the order shown in the
e-mail. After entering all the necessary fields, please click on the
Save
button to allow the setting to take effect. Note that
users can test sending an e-mail by simply clicking on the
Send Test E-mail
button. The description of each SMTP Setting
parameter is summarized in Table 2.11.
Figure 2.16 Example of SMTP Setting
Table 2.11 Descriptions of SMTP Setting
Label
Description
Factory Default
SMTP Server
Configure the IP address of an out-going e-mail server
NULL
