Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
46
of
49
Figure 2.62 Restore from USB Storage Device Pop-up Window for EH3408lu and EH3408u
Figure 2.63 Restore from Micro-SD Storage Device Pop-up Window for EH3408ls and EH3408s
To set the automatic restore of the configuration file from storage device while the managed switch is booting, the
user can click on the gear icon next to
Option of Auto-Restore from Storage
. This will bring up the pop-up window as
shown in Figure 2.64 for EH3408lu and EH3408u or as shown in Figure 2.65 for EH3408ls and EH3408s. On this
window, the user can select
Disabled
or
Enabled
the
Option
from the drop-down selection and then click
Save
button.
Figure 2.64 Option of Auto-Restore from USB Pop-up Window for EH3408lu and EH3408u
Figure 2.65 Option of Auto-Restore from Micro-SD Pop-up Window for EH3408ls and EH3408s
2.8.4
Factory Default feature
The
Factory Default
feature under the
Maintenace
function allows the user to reset the device to the original or
factory default configuration. The Factory Default web page is shown in Figure 2.66. To perform the factory default
setting, the user can click on the gear icon next to the Factory Default to bring up the pop-up window as shown in
