Industrial Managed
Ethernet Switch
User Manual
Configuring
with a Web
Browser
Page
29
of
49
2.4.6
Log Event feature
The
Log Event
feature under the Diagnostic function is shown in Figure 2.29. This web page displays SYSLOG status
of the following events: System Restart, SNMP Authentication Failure, and status of each port.
Figure 2.29 Log Event Feature
To configure the SYSLOG event and SYSLOG status for each port, the user can click on the gear icon to bring up the
Log Event
pop-up window. The
System Restart
and
SNMP Authentication Failure
event boxes can be checked to
enable or uncheck to disable. The
SYSLOG
of each port status can be set to
Disable
,
Link Up
,
Link Down
or
Link Up
& Down
as shown in Figure 2.31.
Figure 2.30 Log Event Setting Pop-up Window
