Quick Start Guide Version 1.2
Atop ABLELink
®
Wireless Serial Server
SW5002
1
Thank you for purchasing
Atop SW5002 Wireless Serial Server
product. This document intends
to provide customers with brief descriptions about the product and to assist customers to get
started. For detail information and operations of the product, please refer to the product user’s
manual in the product CD.
1. Packaging Include
- Atop Wireless Serial Server x 1
- 5 pins Terminal Block for Serial Connector (TB model only) x 2
- 3 pins Terminal Block for Power Connector (TB model only) x 1
- 4 dBi Antenna x 1
- Wall mount kits x 2
- Atop Wireless Serial Server quick start guide x 1
- Product CD containing configuration utility x 1
2. Hardware Setup
Figure 1 shows the names of SW5002 components. In the figure, the indicated switch settings
represent factory settings.
10/100M
Ethernet port
Antenna Connector
Wireless Status
LEDs
System/WLAN
status LED
Reset
button
Serial Status
LED
D-sub 9-pin
Connector
D-sub 9-pin
Connector
DC-Jack
for Power
DB Model (D-Sub 9 pin Con
(5pin Terminal Block Connectors)
Figure 1.
SW5002 Interfaces
eset Button
nectors)
TB Model
*R
: Press Reset button continuously over 3 sec to reload factory default
LED Indications
:
Ds were indicated for
SW5002
’s statu
Name Color Status
The LE
s
Description
Red(2) ON
oor, but the link is connected for the
Its strength is p
wireless link
Yellow(2) ON
ss link can supply
Its strength is fair or good, the wirele
a good transfer channel
Signal
Strength
Green(2) ON
s very good and the link is connected on
Its strength i
best status
Off
r No data transmit or receive
Wireless Link is Broken o
via wireless connectivity
WLAN Green
Blink
r
Wireless Traffic be indicted for data transfe
Off
No data transmit or receive via serial port
COM Green
ata transfer
Blink
Serial traffic be indicted for d
RUN
Green
OFF/ON
System is not ready or halt
