User manual Version 1.0
ABLELink
®
GPRS Serial Server SG6001
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy and, if not installed
and used according to the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna
--Increase the separation between the equipment and device
--Connect the equipment to an outlet other than the receiver
--Consult a dealer or an experienced radio/TV technician for assistance
CE Mark Warning
In a domestic environment, this product may cause radio interference, in which case the
user may be required to take adequate measures.
SG6001 Safety Instructions
To avoid damage and possible danger, SG6001 should not be placed at the
humid environment with high temperature. For more information, please refer to
the descriptions in the specifications.
Please note that
SG6001 GPRS Serial Server
can be referred to as
SG6001
or simply
as
SG6001
through the whole manual. Moreover, please note that SG6001 may be
considered a
GPRS Data Terminal (GDT)
when talking about the complete GPRS
architecture. If it is the case, SG6001 may be referred to as
GDT
.
Copyright © 2004 Atop Technologies, Inc.
3
All rights reserved. Designed in Taiwan.
3/71
