2
~1.Under the knob has a hexagonal
hole which has to aim at the
hexagonal cylinder of base,and
inset the knob into the base.
3
3
1
2
Hexagonal
copper
cylinder
7. Fix the knob
~1.Setting the torque wrench on 2.5 kg,
and fasten the screw.Please must make
sure the screw is fastened in vertically.
~1.Tighten the wire lace in clockwise.
~2.Release the wire lace in anticlockwise.
~3.Pull out the wire lace inside the base.
~Repeat the above steps three times,as you
tighten and release the wire lace which runs
smoothly,thenit is assembled well.
8. Testing
4. Put the reel into
the base
6. Inset the knob
5. Inset the ratch
~1.Put the ratch's breach to
aim at the bulge of the
base.
~1.Pull the lace toward
and put the reel into the base.
outside
breach of ratch
bulge of base
