Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / starting.fm / 19.6.06
6
Charging and discharging the battery for the
first time
The correct charge status can only be displayed
when the batteries are first fully charged
and
discharged through use.
¤
To do this, leave the handset in the charging
cradle
without interruption
until the bat-
tery icon stops flashing in the display. Your
handset need not be switched on for it to
charge.
¤
Once the batteries are fully charged, remove
the handset from the cradle and do not put
it back again until the batteries are fully dis-
charged.
Setting the date and time
§Menu§
¢
Settings
¢
Date/Time
~
Enter the day, month and year
with 6 digits and press
§OK§
. Use
q
to move between the fields.
~
Enter hours and minutes with 4
digits (e.g. 0 7 1 5 for 07.15 hrs)
and press
§OK§
. Use
q
to move
between the fields.
Y
our Aton CL100 is now ready for operation!
Notes:
– After the first battery charge
and
discharge you
may replace your handset in the charging cradle
after every call.
– The handset should only be placed in a base sta-
tion or charging cradle that is designed for it.
– When the handset is in the cradle, it charges even
if it is switched off. You will see the charge status
in the display.
– If the handset has switched itself off because the
batteries are flat and if it is then placed in the cra-
dle, it will switch itself on automatically.
– After the first battery charge
and
discharge you
may replace your handset in the charging cradle
after every call.
Please note:
– Always repeat the charging and discharging pro-
cedure if you remove the batteries from the hand-
set and insert them in again.
– The batteries may warm up as they are charging.
This is not dangerous.
– After a while the charge capacity of the batteries
will decrease for technical reasons.
