10
Description of new and updated functions
Gigaset DL500A / en / A31008-xxxx-xxxx-x-xxxx / Rel3_Saturn.fm / 16.01.2012
V
e
rsion 4.1, 21
.11.2007
Further base settings via Web configurator
Via the Web configurator page
Settings
¢
Management
¢
Miscellaneous
you
can additionally make the following base settings:
u
Enabling registration mode on the base station
u
Changing the system PIN
Registering handsets
You can register up to six handsets with your phone. The registration must be initi-
ated on the phone and the handset.
¤
Open the
Settings
¢
Management
¢
Miscellaneous
Web page.
¤
Click on the
Start Registration
button to enable registration mode on the base
station. Registration mode is active for approximately 60 seconds.
After that, you are prompted to start the registration on the handset.
¤
Start the registration on the handset within 60 seconds as described in the
handset’s user manual.
Once registration is complete, the handset returns to idle status. The display shows
the internal number for the handset, e.g.,
INT 2
. The handset is added to the list of
registered handsets on the
Status
tab.
Changing system PIN of the phone
Protect the system settings of your phone with a 4-digit PIN known only to you.
Before changing important system settings and when logging into the Web config-
urator, you are prompted to enter the system PIN.
The default setting for the PIN is
0000
.
¤
Open the
Settings
¢
Management
¢
Miscellaneous
Web page.
¤
Enter a new 4-digit system PIN for the base station in the
New PIN
field (four dig-
its from 0 to 9).
¤
Click on the
Set
button, the new PIN is enabled.
