Atomtex AT2522, Руководство пользователя, Страница: 15 / 27

the new settings are successfully stored, when the indicator is red, the settings are not stored.
Make a new attempt to store the settings in case the settings have not been stored.
The “Device control” window has three tabs: “Events”, “Signals” and “Functions”.
Event types:
− “Device ON”
− “Device OFF”
− “Radiation detection”
− “Display ON”
− “Battery LOW”.
Figure 3.5
The following parameters can be adjusted for each event: pause (the delay before the
signal), power, type and sequence of the signals. The parameters selected for the pause,