Shenzhen AtomStack Technologies Co., Ltd.
1.Security statement
Before operating our R3 Rotary Roller，please read our instruction carefully，it will show
all the special situation，including some warning of the unsafe behavior which may cause
some property losing even harmful for your personal safety.
1.
Security of Laser
AtomStack R3 Rotary Roller part with Laser engraver is Level 4 Laser product. The power of
laser head is high, it may cause injury of the eye and skin burning.
1. Please wear on the eye protection when you are operating the laser engraver and R3
Rotary Roller
2. Refrain to expose the skin on Level 4 laser beam, especially close distance.
3. It must be supervised by p arents or other adult person when the teenager operating
our device
4. DO NOT touch the laser module when it is activated.
2.
Security of Fire Fighting
1. When Laser engraver operating with R3 Rotary Roller to cutting or engraving will burned
up the basic material, the high intensity laser will create extreme high temperature and massive
heat.
2. Some material will be burned during the cutting or engraving, and will cause some gas
or smog.
3. The lighting spot will create some flame when the laser beam shot at the material. The
flame will move with the laser and will not keep flaming when the laser moving. The operation
must be supervised during cutting or engraving. Please clear the sundry, scrap and flammable
material after the cutting or engraving. Ensure there is fire extinguisher at the workplace of the
operation. There is some smog, steam or particulate which could be poisonous ( plastic or
some flammable material ) caused by material when the laser engraver operating, this smog,
steam or particulate may be harmful for your healthy.
