ATOMSTACK Befon A5 Pro Plus, Руководство пользователя

Страница: 13 / 33

Shenzhen AtomStack Technologies Co., Ltd. support@atomstack3d.com
5. Setting Engraving Parameters
A. Select the engraving file.
Open LaserGRBL software, click "File"> "Open File", then select the
graphics you want to engrave, LaserGRBL supports NC, BMP, JPG,
PNG, DXF and other formats.
Picture 3.8 Open file
B. Picture parameters, engraving mode, engraving quality settings
a.LaserGRBL can adjust the sharpness, brightness, contrast, highlight
and other attributes of the target picture, when adjusting the parameters of
the picture, the factual effect will be shown in the right preview window,
there is no standard here, just adjust the effect you want.
b. Engraving mode usually choose "line to line tracking" and "1bit
dithering", 1bit dithering is more suitable for engraving grayscale graphics.
If you are going to cut, select the vector graphics or centerline engraving
mode.
c. Engraving quality essentially refers to the line width of the laser
scan, this parameter mainly depends on the size of the laser spot of the