Notice
Copyright © 2014 ATOMOS Global Pty Ltd (‘referred to as ATOMOS’). All rights reserved. All
information in this document is subject to change without notice. No part of the document may
be reproduced or transmitted in any form, or by any means, electronic or mechanical, including
photocopying or recording, without the express written permission of ATOMOS. A reference to
ATOMOS includes its related entities, subsidiaries and parent company.
Trademarks
Ninja Assassin / ATOMOS are registered trademarks of ATOMOS Pty Ltd. Apple, the Apple logo,
AppleShare, AppleTalk, FireWire, iPod, iPod Touch, Mac, and Macintosh are registered trademarks
of Apple Inc. Final Cut Pro, QuickTime and the QuickTime Logo are trademarks of Apple Inc. All
other trademarks are the property of their respective holders.
International Hardware Limited Warranty (1 Year Standard/3 Years if registered)
ATOMOS warrants that:
• the main product, not including the IPS screen, or any external accessories, will be free from
defects in materials and workmanship for a period of 1 year from the date of purchase; or 3 years
upon completion of product registration at www.atomos.com
• The TFT/LCD, batteries, case and master caddies will be free from defects in materials and
workmanship for a period of 1 year from the date of purchase regardless of registration.
This warranty is exclusively for the benefit of the original purchaser and is not assignable or
transferable.
If during the warranty period the product is shown to be defective ATOMOS may at its option:
a) replace the goods or supply equivalent ones, b) repair the goods, c) pay the cost of replacing
the goods or of acquiring equivalent ones and d)paying the cost of having the goods repaired;
The customer must notify ATOMOS of any defect in the goods in writing prior to the expiry of the
warranty periods set out above. The customer will be solely responsible for returning the goods to
ATOMOS or its authorized distributor. Upon acceptance of a warranty claim by ATOMOS, where
ATOMOS repairs or replaces the goods, it will be responsible for reasonable shipping costs
incurred in sending the goods to the Customer, provided that customer is located in a country in
which ATOMOS has an authorized distributor or repair center or agent.
Warranty Exclusions
This warranty applies only to defects in workmanship and does not cover defects caused by:
• A failure to comply with the then current operating instructions issued by ATOMOS;
• Neglect;
• Improper or negligent acts or omissions;
• Unauthorized repairs or attempted repairs;
• Tampering with or modification of the goods;
• Connection to incompatible equipment or power sources;
• Exposure to water or weather;
• Exposure to magnetic fields or corrosive liquids or substances;
EXCEPT AS STATED IN THIS WARRANTY, ATOMOS, IT’S VENDORS, AGENTS, RESELLERS AND
DISTRIBUTORS DISCLAIM IN THEIR ENTIRETY ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WITHOUT LIMITATION ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. THE REMEDIES OUTLINED IN THIS WARRANTY ARE THE EXCLUSIVE
REMEDY A CUSTOMER HAS ARISING FROM DEFECTIVE GOODS WHICH ARE SUBJECT TO THE
WARRANTY.
ATOMOS DOES NOT WARRANT THAT THE GOODS WILL OPERATE IN A MANNER WHICH IS
ERROR FREE, OR UNINTERRUPTED. THE GOODS ARE NOT INTENDED TO BE THE PRIMARY
OR ONLY DATA STORAGE DEVICE FOR DATA – CUSTOMERS ARE SOLELY RESPONSIBLE FOR
BACK UP AND PROTECTION OF DATA.
Software License Agreement
IMPORTANT, PLEASE READ CAREFULLY. THIS IS A LICENSE AGREEMENT.
This ATOMOS software, related documentation, any included sample images and other files (the
“Software”), is protected by copyright laws and international copyright treaties, as well as other
intellectual property laws and treaties. The Software is licensed, not sold.
This End User License Agreement (“EULA”) is a legal agreement between you (either an individual
or a single entity) and ATOMOS with regard to the copyrighted Software provided with this EULA.
Use of the Software provided to you by ATOMOS in whatever form or media, will constitute your
acceptance of these terms, unless separate terms are provided by the software supplier, in which
case certain additional or different terms may apply. If you do not agree with the terms of this EULA,
do not download, install copy or use the Software. By installing, copying or otherwise using the
Software, you agree to be bound to the terms of this EULA. If you do not agree to the terms of this
EULA, ATOMOS is unwilling to license the Software to you.
1. Eligible licensees. This Software is available for license solely to purchasers of the ATOMOS Ninja
Assassin, who have purchased a unit manufactured by ATOMOS Ninja Assassin and purchased
through an ATOMOS authorized reseller, with no right of duplication or further distribution, licensing
or sub-licensing.
2. License Grant. ATOMOS grants you a personal, non-transferable and non-exclusive right to use
the copy of the Software provided with this EULA. You agree you will not copy the Software except
as necessary to use it with the ATOMOS Ninja Assassin. You agree that you may not copy the
written materials accompanying the Software. Modifying, reverse engineering, translating, renting,
copying, transferring or assigning all or part of the Software or any rights granted hereunder, to
any other persons or reverse engineering the hardware on which the Software runs, is strictly
prohibited. The software is license, not sold. You acknowledge that no title to intellectual property
in the Software is transferable to you. You further acknowledge that title and full ownership rights to
the Software will remain the exclusive property of ATOMOS and/ or its suppliers, and you will not
acquire any rights to the Software, except as expressly set forth above. All copies of the software
will contain the same proprietary notices as contained in or on the Software. All title and copyrights
in and to the Software (including but not limited to any images, animations, video, audio, text
incorporated), the accompanying printed materials, and any copies of the Software are owned by
ATOMOS or its suppliers.
3. Reverse engineering. You agree that you will not attempt, and if you are a corporation, you will
use your best efforts to prevent your employees and contractors from attempting to reverse compile,
derive circuits, modify, translate or disassemble the Software and/or the ATOMOS Ninja Assassin in
whole or in part. Any failure to comply with the above or any other terms and conditions contained
herein will result in the automatic termination of this license and the reversion of the rights granted
hereunder by ATOMOS.
ATOMOS reserves the right to terminate this license without prejudice to any additional recourse
ATOMOS may have against you if you violate any of its terms and conditions.
Master Caddy II Docking Station (Sold separately)
To access and edit your recorded material
Connect the Master Caddy II Docking Station to a Mac® or Windows® editing
workstation via USB 2.0 and/or USB 3.0 compatible port/s.
When using USB 2.0,
you may need to connect the second USB power cable on
the dock to a second USB 2.0 port. This will ensure enough power is provided when
using USB 2.0.
When using the Master Caddy II from the Ninja Assassin, insert it into the Docking
Station. After a short wait your recorded video will become accessible as a standard
external disk (Native ExFAT / FAT32 formatted drive/s also supported).
www.atomos.com
|
Atomos Knowledge Base:
atomos.activehosted.com/kb
© ATOMOS Global Pty. Ltd. trading as ATOMOS under license. All trademarks are the property of their respective owners.
Atomos reserves the right to change or alter any product specifications without notice.
For more detailed instructions and important up-to-date information regarding
Ninja Assassin please download the complete Ninja Assassin User Manual
www.atomos.com/support
Warranty & Conditions
Connect & Edit
Playback & Edit: One-touch Review
Display
Use transport controls or touch
anywhere on the timeline to scrub to
a section for review. Check recorded
shots during playback using WFM and
Monitor Assist tools.
Move frame by frame to select cut and
tag In and Out Points, marking them as
Favorite or Reject. Once cut and tag
is complete, export an XML project for
instant timeline assembly and editing.
Playback & Review on large monitor:
Recorded footage can also be played from the HDMI Out.
This is ideal for large screen client viewing, feedback and
editing on location.
TIP:
Touch the center of the screen to remove overlays,
touch again to remove the control bar and touch again to
restore all controls.
Timeline / scrub bar
Timeline showing tagged footage
Touching the yellow Display Options icon to reveal the LUT and display option sliders.
Up to 8 LUTs can be loaded in your recorder in a .cube format.
Click the empty slot then click the folder icon and navigate the required LUT file
(either on the Disk of from the Built-in Menu) and press on it twice.
1 tap on the MON LUT icon will allow You can preview the LUT as 50/50 split.
A 2nd tap will apply the LUT across the entire image.
A 3rd touch will turn the LUT off.
An option to apply the LUT to your recording and also to apply the LUT to the loop out is available
for selection via the input menu.
Display off Icon allows you to turn of the LCD screen and still maintain the record or play back function.
Touch the display of icon, then press the power button to lock the screen and the display will then turn off.
Press power button again to turn screen back on and unlock the menu.
Flip - touch the Flip icon to horizontally flip the display
Tally on - touching this turns the rear tally light on off and the front tally light will remain green.
Reset returns the display option sliders to the default setting.
3D LUT:
ON
DISPLAY ON
FLIP
TALLY ON
RESET
0
1
2
3
4
5
6
7
8
Select LUT
MON
LUT
MON
LUT
MON
LUT
MO
LU
Tagging your footage in Playback or Record mode
Touch once to set the IN point. Touch again to set OUT point.
Reset tagging
(In Playback only)
Loop: Loop playback
Set Loop In/ Out point
Previous/Next Clip
Clear Tagging
Play: Press to play clip
Jump to beginning/end
Frame by frame RWD/FFWD
Super RWD/Super FFWD
Playback Interface
Playback mode offers the ability to playback a
single clip or by tapping the file name you can
click the playlist option and create a playlist of
either Favorite, Selected or both in run down
or Reverse Order. (clips must be of the same
resolution and codec to create a playlist)
For more information on our products:
atomos.com
QUICK START GUIDE
NINJA
ASSASSIN
QUICK START GUIDE
NINJA ASSASSIN
RESET
