Atomic Ion XL Series, Руководство пользователя

Страница: 144 / 152

144
6
. Replace the electrical parts with genuine parts please, if need to replace
with other makes, replacing parts load power do not exceed the original parts
load power (such as Bulb, horn, cigarette lighter, buzzer)
；
7
. When repairing or replacing drive circuit parts, original insulator,
protective rubber cap, waterproof bushing must be installed and check the
tightness of the bolts one by one to ensure they are not loose.
8
. After the repairing or replacing electrical parts, Cable and electrical
parts must be well connected, cable arrangement and fixing method must be
restored to original.
9
. When removing the drive circuits wire, exposed connector must be
wrapped with insulating tape.
10
. Any safety protecting device is not allowed to be removed (such as
charge anti walk plug, emergency switch, main fuse box, battery temperature
sensor, door controlled switch)
5-4. Cautions for electric repairing