5
P5
P4
H3
H2
P8 Bluetooth
Battery Box
ON/OFF
SWITCH
H2
FIGURE 2
STEP:2
Install End Leg Panels
(P4)
onto the Legs using Bolts
(H3)
and Flat Washers
(H2)
as shown
in
FIGURE 2
.
Tighten Bolts (H1) from STEP 1 and Bolts (H3) at this time.
Screw
P5
Leg Levelers into the bottom of each leg as shown in
FIGURE 2.
Remove the battery cover of
P8
Bluetooth Battery Box and insert 3 AA Batteries (not included)
into the battery compartment.
Lift the table assembly from the floor with at least four strong adults, turn it over, and set
the table assembly on its legs in the location where you will play.
PARTS REQUIRED:
H3
8 x 40mm Allen Head Bolt
8 pcs -
P4
End Leg Panel
2 pcs -
P5
Leg Leveler
4 pcs -
H2
8.5 x 22mm Flat Washer
8 pcs -
P4
See”
FIRST TIME BATTERY INSTALLATION AND NOTICE
“ , before installing batteries, located on
page 10.
NOTE: Be careful to
match batteries to
battery box polarities
CAUTION: Four strong adults are recommended to flip
the table as shown.
1. Grab the table on the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.