Questions about ATOMIC products? Give us a ring! 717-626-4408
www.atomicdesign.tv
Page 2 of 3
RENTAL
SOLUTIONS
FASTWALL
INSTALLATION INSTRUCTIONS
STEP FOUR
Connect risers to bases using C3 connectors, and C2 connectors on each end.
NOTE:
Connecting C4 connectors to each riser as it is placed makes the following steps easier.
If adding interior lighting to FASTwall, place lights inside risers at this point.
STEP FIVE
Use C4 connector and F2 connector on each end to continue assembling FASTwall.
Page 2 of 3
