background image

0309ver1

4

INSTALLATION

Please follow this quick set-up guide to ensure trouble free installation of your
headphones.

Step 1:

Connect the Stereo Audio Cord (13) to the audio output socket (i.e. PHONE/
HEADPHONE 3.5mm socket) of your audio source, e.g. TV, HiFi, CD, DVD player etc.

*** If your audio source has 2 RCA output sockets (red and white in colour), use the
90mm Y-connection Cord ) (not included) for connection, if necessary.

Step2:

Connect one end of the AC/DC Adaptor (18) to the DC IN Socket (15) at the rear side of
the transmitter, and the other end to the main electric wall outlet.

Or
Connect the USB cord (not included)to computer of your audio source and the other end
to the DC IN Socket (15) at the rear side of the transmitter.

Suggestion: When listening music from computer,
1)please try to use USB cord for power and music source at the same time.
2)Please advoid to put USB cord on computer and using analog 3.5mm cord at the same
computer to get music sources, the quality will be affected.
 Pls use either one method!

Step3:

The transmitter will be automatically ON (Green) when there is audio signal IN from the
audio source (please make sure that the transmitter is powered on by the AC/DC adaptor
in Step 2). Then the Power LED Indicator (11) will glow Green (flashing) to confirm that
the transmitter is ready for operation. Place the transmitter on a dry, cool place preferably
above head level.

*** The transmitter has auto-cut-off function. When there is no audio signal for over

10

minutes, the transmitter will goes into deep sleep mode. TX can wake up immediately
after it detects audio input again..

Step 4:

Open the Battery Cover (8). Insert 2 pcs AAA size batteries into the Battery
Compartment (7) at the Left hand side of the headphones observing the correct polarity.
Then close the Battery Cover (8), and switch the headphones ON (4).

Step 5:

Switch  on  your  music  device  (TV.  HiFi,  CD,  DVD  etc.)  and  start  your  media  playing.
Then headphone’s LED will be Green and music comes out.

Step 6:

Содержание AWD205









Отзывы: