Note
• Once you have successfully paired your device,
you may not need to repeat the above steps.
• When pairing with a computer, please consult your
computer manufacturer for Bluetooth
®
pairing
instructions and/or the latest Bluetooth
®
Drivers.
• Keep all non-water-resistant devices
(phones, mp3 players, etc.) in a dry place
where they will not come in contact with water.
• A pairing code is not required.
• The Atomi Shower Head with Bluetooth Speaker will
automatically power off after 10 minutes of inactivity
(no Bluetooth connection / no play)
Safety Information
1. Read these instructions carefully for best use.
2. DO NOT use the Shower Head with Bluetooth Speaker
near open flames, such as candles, heat sources,
radiators, and stoves.
3. Only clean the Shower Head with Bluetooth Speaker with
a dry cloth.
4. WARNING: Risk of electric shock.
5. For connection to a power supply not in the U.S.A., use
an attachment plug adapter of the proper configuration
for the power outlet, if needed.
6. Please check before use, if the output voltage and
current of the power supply are suitable for the product.
7. Children should be supervised to ensure that they do not
play with the appliance. THIS IS NOT A TOY.
8. Use this product only for its intended use as described in
this manual.
9. Atomi is not liable for any damage caused to
smartphones, iPod
®
/MP3 player or any device.
10. Never operate this product if it has a damaged cord,
plug, cable or housing.
11. Only set on dry surfaces. Do not place on surfaces wet
from water or cleaning solvents.
12. CAUTION: Risk of property damage. Do not expose
batteries to sunlight, fire, or other forms of excessive heat.
13. CAUTION: Risk of product damage. Do not submerge the
wireless speaker.
14. CAUTION: Risk of product damage. The wireless speaker
and battery are rated to operate in temperatures up to
140°F (60°C). Do not expose to heat sources or install in
any location where the temperature may exceed 140°F
(60°C).
Built-In Microphone
The Atomi Shower Head with Bluetooth Speaker is equipped
with a built-in microphone, for easy hands-free talking:
1. Make sure the Atomi Shower Head with Bluetooth Speaker
is successfully paired with your device.
2. To answer or end a call, simply press the
power button one time when you hear a ringtone.
3. To reject an incoming call, press and hold the
power button for 2 seconds.
NOTE:
When an incoming call is detected, the Atomi Shower Head
with Bluetooth Speaker will pause the music and a ringtone
will sound. After the call is terminated, the music will resume
to play automatically where it left off. When making a call, use
your phone to dial and the Atomi Shower Head with Bluetooth
Speaker will automatically go into hands free mode.
8
9
