Addressable Track Non-Dim On/Off Module
Will dim or switch power ON or OFF to a luminaire via remote control.
Module will function with incandescent line voltage and low voltage
luminaires, 250W MAX. Module attaches anywhere along track. Accepts
commands from Laser Remote Control and Wall Remote Control units. Can
be combined with Track Master Module to create several different lighting
effects.
See separate specification sheet for additional details before specifying this unit.
CAM250VAWH
(Matte White)
CAM250VABK
(Matte Black)
Track Master Module
Sends control signals along the track to other modules from any location on
the track. Used to create cycle scenes, lighting effects, and dim, raise, or
turn on or off the light levels on all modules on the track simultaneously.
Use one track master per track branch circuit. Accepts commands from
Laser Remote Control and Wall Remote Control units.
See separate specification sheet for additional details before specifying this unit.
CAMTMWH
(Matte White)
CAMTMBK
(Matte Black)
Laser Remote Control
Used to program the system and change light levels from a remote location.
Equipped with a laser and infrared (IR) transmitters. The visible laser signal,
when pointed at a module, places the module in program mode.
The laser signal accuracy allows a single unit to be selected easily when
multiple modules are on the track & the IR signal programs the desired
functions. The remote will allow the user to set the light level, turn modules
on or off, set and run multiple lighting scenes, set fade rates, set cycle
times, and begin and end cycles. The remote operates the Dimming
Module, Non-Dim On/Off Module, and Track Master Module.
See separate specification sheet for additional details before specifying this unit.
CAMLRC
Wall Master Control
Used to control Addressable Track Dimming & Non-Dim On/Off Modules in
the track in order to activate programs in the system from a wall location.
The wall remote will allow the user to run multiple programmed lighting
scenes and to begin and end cycles. A Track Master Module must be used
with the Wall Remote Control, in order to control the modules in the system
to run the effects.
See separate specification sheet for additional details before specifying this unit.
CAMWRCWH
(Matte White)
CAMWRCI
(IVORY)
ATOM PROGRAMS
SCENES:
Lighting effects and light levels can be stored in each module for use at any
time.
Each group of stored settings is called a scene. Each module can store 6
scenes.
FADE - Effects:
The time transition between scenes can be programmed into each module.
The units are pre-programmed with a 3 second fade rate from the factory.
CYCLE - Effects:
This Function requires a Track Master Module. The modules will cycle
through their scenes in a continuous loop. You can cycle through scenes,
cycle on, or cycle off. Up to 6 Cycle effects can be programmed.
For a detailed explanation of operation, please see the ATOM Operations
Manual.
ATOM Addressable Track Module System
7 1/4"
1 9/16"
2 1/16"
4 11/16"
1 9/16"
7 1/4"
1 9/16"
4 11/16"
1 9/16"
2 1/16"
5/8"
3 1/43"
1 1/4"
(31.75)
4 1/2"
(114.3)
2 3/4"
(69.85)
Lightolier
a Genlyte company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2005 Genlyte Group LLC • D0705
Job Information
Type:
Lytespan
®
Track Lighting System
CAM25OVA
Page 2 of 2
Addressable Track Dimming Module
