Atom InfaLite, Руководство по эксплуатации

Страница: 21 / 36

19
MAINTENANCE
Maintenance Inspection
Maintenance Inspection [6]
In order to use the unit safely for a longer period, perform the maintenance inspections described below.
Medical institutions are responsible for performing the maintenance inspections. They are allowed
to entrust the maintenance inspections of the unit to an appropriate external contractor.
Clean and disinfect the unit before maintenance inspections, repairs, or disposal.
CAUTION
Inspection before use •
Check the basic functional operation of each part of the unit every time you are going to use the unit.
Monthly inspection •
Check the operation of each function of the unit every month.
Semiannually inspection •
Check the operation of each function of the unit every six months.
Periodical inspection •
Contact your local Atom representative annually for periodical inspection.
Parts requiring periodical replacement •
Some parts need to be replaced periodically depending on their period of use.
Measuring the Light Intensity 6-1.
Check that the light intensity is operating at its specified level every six months.
Use a calibrated commercial light intensity measurement device to measure the light intensity.
(1)
Attach the mattress cover to the mattress, then
place the light intensity measurement device on
the mattress cover. Make sure that the lens cover
of the irradiation head and the light intensity mea-
surement device are parallel, and that the distance
between them is 60cm. Next, align the center of the
irradiation head with the center of the light intensity
measurement device.
CAUTION
Use a clean mattress cover so that correct mea-
●
surements can be obtained.
Measurement
section
Mattress
Cover
Parallel 60cm
Mattress
Irradiation head
Lens cover
Light intensity
measurement
device