PRECAUTIONS, WARNINGS:
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature
accompanying the appliance.
Before installing your subwoofer, this user manual must be read thoroughly. If you have any doubts about how to connect the equipment, ask
for advice from your dealer.
-
Do not expose this product to rain or humidity and do not insert foreign bodies inside the device.
-
Do not use the subwoofer close to a source of extreme heat (radiator, etc.).
-
If the power cable does not perfectly fit in your mains socket, consult an electrician and replace the socket. The power cable must never be
walked or pinched. The mains socket must stay accessible at all time.
-
Do not overload the mains sockets, multi-sockets or extension cables to avoid electrical shocks.
-
Switch the subwoofer off when not in use (1). In case of lightning storm or long absence, disconnect from the mains (3).
-
Only connect the device with the mains type indicated on the device’s silkscreen or specific label. If you have any doubt, consult your
electricity supplier or device dealer.
-
Ventilation: Ensure that the front panel of the amplifier remains « unobstructed ». Do not cover the subwoofer or install it inside a closed
cabinet.
-
Never dismantle the amplifier module control panel to avoid the risk of electrocution. Your dealer and/or a qualified technician must be
contacted for any and all servicing requirements.
-
Fuse: In the event of a complete failure to function, first disconnect the power cable from the mains, and then check the mains fuse. When
replacing the fuse, only use a fuse which is absolutely identical to the original one. If this does not solve the problem, please contact your
dealer for assistance.
-
Never allow an output wire to come into contact with the earth ground (the amplifier chassis).
-
Never handle the (6), (7), (12), (13), and (14) switches when the “Standby/On” switch (4) is ON. Always turn off the unit on STANDBY prior to
handle these switches
-
Never change the factory settings which are locked by a screw (see control panel section).
-
Cleaning and maintenance: Your subwoofer enclosure is made out of MDF (medium density fiberboard) with a natural veneer wood finish. No
special maintenance is required. For cleaning purposes always use a soft cloth, which may be slightly moistened if necessary (we recommend
the use of soft “micro-fiber” cloths). WARNING: Never apply solvents, detergents or any other alcohol based products.
-
Do not use accessories other than the such supplied with the device or explicitly recommended by the manufacturer.
-
Transport: When using a trolley, be careful moving the device to avoid injuries or damage due to tipping.
-
Keep all wrappings out of the reach of children (Suffocation hazard).
In the case of failure to observe the precautions for use, the manufacturer’s warranty will be immediately canceled.
CONTROL PANEL:
1 – Power On/Off switch
2 – Fuse
3 – Mains socket (cable supplied)
4 – STANDBY / ON switch
5 – « Standby » LED indicating mains connection, or
security if blinking
6 – Filter slope selector: 24dB/Oct; 12 dB/Oct; LFE
7 – Phase switch: 0-180°
8 – High cut-off frequency adjustment knob: (40 to 150
Hz, not linear).
9 – Sound level adjustment knob (volume).
10 – Low level inputs (left and right)
11 – High level inputs (left and right)
12 – Factory setting EQ, do not modify
13 – Factory setting X-MAX, do not modify
14 – Factory setting U-MAX, do not modify
15 – Direct mode switch (*internal), do not modify.