User Guide
Page 10
Pairing the Headset
To use the Headset with a Bluetooth-enabled device for the first time, you must
pair the Headset with that device, for example, a mobile phone.
Different device may require different pairing procedure. The pairing procedure
for the Headset is described here. Please refer to the user manual of the
other device for specific pairing method.
Each Headset has a unique passkey. To complete pairing, you need to enter
the correct passkey when required by the other device during pairing.
To pair the Headset with the device,
1. Activate the Bluetooth function in the other device if necessary. Please
refer to the user manual of the device.
2. Turn the Headset off first. Press and hold the VOLUME button of the
Headset and then press the ON/OFF button once. Wait until the
indicator light on the Headset flashes green and red. The Headset is
now ready for pairing. Make sure the Headset and the other device are
not too far apart (within 3 meters is recommended).
3. Initiate Bluetooth pairing in the other device to pair it with the Headset.
Please refer to the user manual for that device.
4. When asked by the device, enter the Headset passkey and then confirm if
necessary. If pairing is successful, the Headset indicator light flashes
green and is ready for voice connection.
5. If no pairing is possible for a period of time (approximately 1 and a half
minutes), the headset will turn itself off. Previous pairing (if any) is
revoked.
6. You can abort pairing any time by pressing and holding the ON/OFF
button for about 3 seconds until the Headset is turned off. Previous
pairing (if any) is revoked.
