ato form Starlight Flex, Руководство пользователя

Страница: 16 / 24

Page 16/24 (37/21)
Assembly and adjustments
Re-inserting the padding-inlet
The padding-inlet is made of slightly
stretchable or mouldable material and can
be adjusted very well to the circumference
of the head.
After completing all adjustments, fix the
padding-inlet (6) back into the outer ring
(1).
Make sure that the inlet is fixed evenly and
centrally in the outer ring.
To do this, it is advisable to first fix the inlet
in the front centre as shown in the illustra-
tion and then press it on evenly at the sides.
Fig. 7: Inserting the padding-inlet
1
6
Note!
The settings on your head protection
are stabilised by the connection of the
padding-inlet to the outer ring. Check
that the padding-inlet sits at the correct
height of the outer ring all round and is
securely fastened.
The illustrations in chapter 10.1 show the
settings on the basic model. All optionally
available models are set identically as de-
scribed in chapter 10.1.
When using the forehead protection or the
sunshield, make sure that they are firmly
attached in the centre of the forehead.
10.2 Accessories / options
For a complete overview of our extensive
range of accessories for the Starlight
®
Flex
see item 11.2 Types and accessories on
page 18.