ato form Starlight Active, Руководство пользователя

Страница: 10 / 16

Page 10/16 (26/21)
Preparation for mounting
The Starlight
®
Active is supplied as follows:
• Head wreath (leather) with receptacle A
for the rod 1
• Bracket for the pressure rod 2
including
joint 3
and fixing screw
4
• Pressure bar 5
Unpack the product and remove all pa-
ckaging parts.
Ensure that all supplied components are
present and undamaged.
Have the required tools, components and
mounting elements ready to hand before
beginning the assembly.
Mounting
Secure the support for the pressure rod
2
with three grub screws on the receptacle
provided for this purpose on the head ring
(Fig. A)
1
through the three small holes on
the outer edge of the receptacle.
Slide the pressure rod
5
into the holder, set
the desired length and inclination 3 and
secure the pressure rod with the locking
screw located at the end of the holder
4 .
Instead of the pressure rod, you can optio-
nally use other working materials such as a
pencil or a brush.
A
1
2
3 5
4
A
Assembly and adjustment
8 Assembly and adjustment